Riso 570 User Manual - page 15
Before Starting to Use
Safety Guide - Handling and Operation
11
Safety Guide - Handling and Operation
This section describes the precautions to be observed when handling the machine. Read this section before operat-
ing the machine.
Operation Environment
Important!:
• Operate the machine under the following appropriate environment conditions.
Temperature range: 15
°
C to 30
°
C (59
°
F to 86
°
F)
Humidity range: 40% to 70% (noncondensing)
Machine Handling
A
WARNING:
• Do not place water containers or metallic objects on the machine. Fire or electric shock may occur if water or metal-
lic objects fall into the machine.
• Do not insert any metallic material or flammable substance into the machine through any opening. This can result
in fire or electric shock.
• Do not remove machine covers. Exposing internal parts may result in electric shock.
• Do not disassemble or rebuild the machine by yourself. This can result in fire or electric shock.
• If the machine emits excessive heat, smoke or foul odor, immediately turn off the POWER, unplug the power cord
and contact your service representative. Failure to do so can result in fire or electric shock.
• If something drops inside the machine, immediately turn off the POWER, unplug the power cord and contact your
service representative. Failure to do so can result in fire or electric shock.
• Never stick your hands or fingers in the openings of the machine during operation.
• Keep loose clothing or long hair away from moving parts to avoid becoming entangled.
• Do not place heavy objects on the machine. The objects might fall and cause injury.
• Contact your service representative before moving the machine.
B
Caution:
• Do not open any covers or move the machine during operation.
• Unplug the power cord, if you do not use the machine for a long time.
• The machine has precision parts and driving parts inside. Do not handle the machine in other ways than described
in this manual.
• Do not apply any shock to the machine.
Important!:
• Do not unplug the power cord or turn off the power during operation.
• Be sure to open and close all machine covers gently.
USB Flash Drive
Important!:
• Use a USB Flash Drive to store large volumes of data. Depending on the types of USB Flash Drive, the machine
does not work properly.
• When connecting or disconnecting the USB Flash Drive, follow the proper procedures.
• We cannot guarantee data saved in the USB Flash Drive against loss caused by accidents or unforeseen events.
We recommend that you use your computer to make back-up copies of any important documents.
CAN_EN.book Page 11 Friday, September 21, 2007 10:42 AM