Riso 570 User Manual - page 229
Troubleshooting
When a Message Displays
225
Paper is jammed in the Print Drum (Cylinder)
area.
1)
Pull out the Print Drum (Cylinder).
)
p.209
2)
Remove the jammed paper.
B
Caution:
• Do not touch the separation hook or master
removal hook when putting your hand into the
unit to remove paper. The sharp tips of the
hooks can hurt your hand.
Paper did not eject correctly.
Check for any jammed paper on the paper exit
area.
When using special paper, adjust the Paper
Arranger on the Receiving Tray Paper Guides
according to the paper characteristics.
)
p.35
Paper jam in the Sorter (option).
Remove the jammed paper from the Sorter
(option).
Area
Indicated/
Blinking
Possible Cause
Action
Separation Hook
Master Removal Hook
CAN_EN.book Page 225 Friday, September 21, 2007 10:42 AM