Riso 570 User Manual - page 30
Getting Acquainted
Display
26
When [Scanning] is selected for the Initial Screen
If you frequently scan and save original documents, we recommend that you select
[Scanning]
.
The Scan Basic Screen displays at start-up.
Note:
•
key
key can be set to function as “Mode Selection” or “Loop”.
Select “Mode Key Pattern” on the Admin. screen. (
)
p.161)
Tip:
About the Recognition Screen
Scan Basic Screen
Note:
• Refer to “Storing Original Data and Use Method” (
)
p.182) for
information about storage memory and scan mode.
• This setting is available when the optional Document Storage
Card DM-128CF or USB Flash Drive is attached.
[Mode
Selection]
Pressing the
key will open the Mode Screen no
matter which screen you are currently on.
[Loop]
The screen changes as shown below when the
key is pressed.
• Normally: “Master Making Basic Screen”
←→
”Print Basic
Screen”
• When the optional Document Storage Card DM-128CF
or USB Flash Drive is attached: “Scan Basic
Screen”
←→
“Master Making/Print Basic Screen”
This machine is equipped with a User Management func-
tion. (
)
p.104,
)
p.166 “Admin.”). If “User Management”
is set, the Recognition Screen is displayed. If the one of
these screens shown on the right side is displayed, input
the PIN code or connect the registered USB Flash Drive.
Consult your administrator for the PIN code and the reg-
istered USB Flash Drive.
PIN code Input Screen
Registered USB Flash Drive Screen
A4
Auto
Ready to Scan Data
Image
Contrast
Size
Format
Functions
Basic
Admin.
Page No.1
File Name
Owner
Owner-1
scan_0001
1_folder
Directory
Auto
Line
Preview
Dot
Process
Book
Shadow
Input the PIN code
OK
Insert the registered
USB flash drive
CAN_EN.book Page 26 Friday, September 21, 2007 10:42 AM