Riso 570 User Manual - page 208
Manual is about: EZ series
of
262
Replacing Consumables
Replacing the Master Roll
204
Tip:
If You Cannot Insert the Master
Insert the leading edge of the Master using the fol-
lowing steps.
1)
Raise the Master Guide Flap
Turn the dial on the edge of the Master Guide
Flap towards the rear and raise the Master
Guide Flap.
2)
Pull out the master to the line indicated by the
arrow.
3)
Lower the Master Guide Flap.
10
Return each part to its original posi-
tion.
Close the Master Making Unit Cover.
Return the Master Making Unit to its original posi-
tion and close the Front Cover.
CAN_EN.book Page 204 Friday, September 21, 2007 10:42 AM