Riso 570 User Manual - page 44
Basic Operations
Printing from a Paper Document or Book
40
7
Press the
key.
Starts scanning of the original. A master is made
once the scan is completed, and a proof copy will
be printed.
Tip:
Auto Idling
When “Auto Idling” is set to ON, idling operations
may occur when master-making process is initi-
ated.
Factory default is set to idle automatically at the
beginning of the master-making when the
machine is inactive for over 12 hours.
To toggle “Auto Idling” ON/OFF, or to modify num-
ber of hours before activating next idling, go to the
Admin. screen.
)
p.166
Idling can also be manually initiated when making
a master.
)
p.146
Note:
• When “Auto Process” is selected, the process
will be different.
)
p.61
8
Check the proof copy result.
When a proof copy is printed, the Print Basic
Screen will be displayed automatically.
Check the proof copy; e.g., print position and den-
sity.
If necessary, change print position and density.
• Print Position (
)
p.90)
• Print Density (
)
p.89)
• Interval Printing (
)
p.93)
• Jump Wing Control (
)
p.95)
After adjustment, press the
key to print a
proof copy.
Important!:
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink on the Print Drum (Cylinder).
Press the
key to print proof copies sev-
eral times.
Note:
• You can also adjust the print position (up and
down only), the density, and the speed while
print process is in progress.
9
Enter the number of copies using the
Print Quantity Keys.
The entered number is displayed on the Print
Quantity Display.
Making Master...
Image
Contrast
Size
Paper
Info
Idle
Line
Auto
A4
Black
Reserva-
tion
Multi-Up
Editor
Dot
Process
Black
Basic
Selections
Functions
Admin.
Print Position
Paper
Idle
Info
Select Print Quantity
0 . 0mm
A4
Renew Page
Reserva-
tion
Interval
CAN_EN.book Page 40 Friday, September 21, 2007 10:42 AM