Riso 570 User Manual - page 46
Basic Operations
Printing from a Paper Document or Book
42
Tip:
Operations on the Recognition Screen
When “User Management” is set by the administrator,
the users will be asked to identify themselves (“User
identification access”: if he/she is registered or not) dur-
ing operations.
The user identification procedures will differ according
to the Recognition and Identification System decided by
the administrator.
)
p.104
Note:
• A PIN code and USB Flash Drive are used in the
Recognition and Identification System. Contact
your administrator for the PIN code and the USB
Flash Drive you have to use.
When the PIN code Input Screen is
displayed
Enter the PIN code using the Print Quantity Keys
and touch
[OK]
.
The initial screen will be displayed after the user has
been identified.
Note:
• If an incorrect PIN code is entered, an error mes-
sage will be displayed. Re-enter the correct PIN
code.
When registered USB Flash Drive
Screen is displayed
Connect the registered USB Flash Drive to the USB
slot.
The initial screen will be displayed after the user has
been identified.
Note:
If an unregistered or unusable USB Flash Drive is
connected into the machine, an error message will
be displayed. Connect the registered USB Flash
Drive.
Important!:
After printing is completed, press the
key to log
out before leaving the machine. If you do not log out,
the logged-in state will remain until “Auto Clear” is
activated. During this time, anyone can use the
machine (as you) without logging in.
For “Auto Clear”, see
)
p.165.
Input the PIN code
OK
Insert the registered
USB flash drive
CAN_EN.book Page 42 Friday, September 21, 2007 10:42 AM