Riso 570 User Manual - page 172
Advanced Features
Changing Default Settings [Admin.]
168
Customizing the Default Settings
The default settings can be changed when the machine is not in operation.
Make sure there is no pending or current Print Job operation.
Note:
• If the administrator is registered in User Management, only the administrator can change the [Admin.] settings.
(This operation requires input of the administrator's PIN code or connection of the registered USB Flash Drive.)
See
)
p.104
• On the Admin. screen, the current setting is displayed on the right side of each button.
1
Touch [Admin.] on the Basic Screen
for each mode.
2
Touch [OK].
Note:
• When an administrator is registered in User
Management, the Recognition Screen is dis-
played.
Operate the screen to log in as the administra-
tor. If already identified as the administrator, the
Recognition Screen will not be displayed.
Users other than administrator are prohibited.
When “Recognized by” is set to
“PIN code”
Input the administrator’s PIN code using the
Print Quantity Keys and touch
[OK]
.
When “Recognized by” is set to
“USB Flash Drive”
Connect the administrator’s registered USB
Flash Drive to the USB slot.
The Admin. screen is displayed once access
has been identified.
A4
Line
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
Info
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
R e s e t s c u r r e n t s e t t i n g s
o n c e o p e n e d
Basic
Selections
Functions
Admin.
OK
Ready to Make Master
Input the PIN code
OK
Insert the registered
USB flash drive
CAN_EN.book Page 168 Friday, September 21, 2007 10:42 AM