Riso 570 User Manual - Enlarging/reducing Originals
Functions for Master-Making
Enlarging/Reducing Originals [Standard Ratio] [Margin+] [Free] [Zoom]
55
Enlarging/Reducing Originals
[Standard Ratio]
[Margin+]
[Free]
[Zoom]
The document can be printed enlarged or reduced. The following methods can be used to enlarge/reduce the original.
Standard Ratio
Enlarging or reducing a standard-sized original (A4, B5, Letter, Legal, etc.) to print in another standard size.
Auto*
The original can be automatically enlarged or reduced and printed according to the paper size in the Paper Feed Tray.
*“Auto” is available only when the originals are placed in the ADF unit (Option).
Margin+
Reducing the original slightly. This feature is useful when allowing binding margins, or when text or diagram
extends beyond the printing area.
)
p.18
Specify reduction rate of 90%-99% on the Admin. screen.
)
p.164
Note:
• “Margin+” and “Standard Ratio” can be selected at the same time.
Free
The top/bottom and left/right of the original can be enlarged or reduced and printed as desired.
Specify the enlarging/reducing between 50% and 200% in increments of 1%.
Zoom
Allows you to specify numerical resize ratio.
Specify the enlarging/reducing between 50% and 200% in increments of 1%.
Note:
• To avoid paper jam, flipping or ink smudges on the back side by design the machine does not print too close to the
edge. The top edge in particular needs 5 mm (
3
/
16
") of margin space.
)
p.18
5 mm (
3
/
16
") wide area on the top edge (marked
) of the Glass Platen or the ADF unit (Option) cannot be
scanned, regardless of enlargement or reduction settings.
• Do not position the original within 5 mm (
3
/
16
") of the top edge, or the top edge of its printed image will be cut off.
This 5 mm (
3
/
16
") margin will remain even in the “Max. Scan” setting.
)
p.86
• If the original document has no margin on its top edge, the top 5 mm (
3
/
16
") of its print will be cut off even when “Mar-
gin+” is selected. Move the original about 5 mm (
3
/
16
") inwards from the top edge of the glass platen or the ADF unit
(Option) and reduce the size.
Top: This area (5mm (
3
/
16
") from the top edge)
cannot be scanned.
Placement of original document
(Top Side)
(Bottom Side)
Original
Glass Platen
CAN_EN.book Page 55 Friday, September 21, 2007 10:42 AM