Riso 570 User Manual - page 236
Troubleshooting
When a Message Displays
232
Consumable Information Screen
In order to assure optimum printing, the machine acquires information from the consumables.
If acquired matching information is not proper, the Consumable Information Screen is shown.
Enter appropriate values.
The
icon on the Info Button will be grayed-out when this occurs.
)
p.201
Note:
• Entering an inappropriate value does not affect usual operations but may result in bad print quality.
• When you perform the following operations, the values set on the “Consumables Information Input Wizard” screen
disappears and thus you need to enter the values again.
– After the power switch is set to
(OFF), the switch is set to
(ON) again
– After the machine is placed into the Sleep status, the
key is pressed
• If you are not sure the best setting for the consumables used in the machine, we may suggest that you use “1”
(default setting) except for “H1” setting and adjust from there if necessary based on the result of the printed copies.
Riso takes no responsibility, and cannot advise as to the best setting, for particular consumables not manufactured
and sold by Riso.
Ink Information Input Screen
This screen pops up when data could not be obtained from the Ink Cartridge.
Touch
[OK]
and enter values as shown below.
Screen Display
Description
Values
[H1] Ink Color (Colour) Setting
Select the same color (colour) as the Print
Drum (Cylinder) currently in use.
1: Black 2: Color (Colour)
Image
Black
Idle
Info
Line
Basic
Admin.
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
Cannot Get Consumables Info
Input Values Required
Ink
OK
CAN_EN.book Page 232 Friday, September 21, 2007 10:42 AM