Riso 570 User Manual - page 244
Troubleshooting
Troubleshooting
240
Printed copies are not neatly
aligned in the Paper Receiving
Tray.
The positions of the Receiving Tray
Paper Guides and the Paper Stopper
are inappropriate.
Adjust the Receiving Tray Paper Guides
and the Paper Stopper to the size of
paper. For thick paper, slightly widen them
as necessary.
If you have adjusted the horizontal position
on the Paper Feed Tray, shift the Receiving
Tray Paper Guides in the same direction.
)
p.35
The Paper Arrangers are not properly
set.
Set the Paper Arrangers properly.
)
p.35
The Paper Feed Pressure
Adjustment Lever is positioned
incorrectly.
If the Paper Feed Pressure Adjustment
Lever is set to “CARD (
)”, printed
copies may not be correctly aligned when
using standard paper.
Set the Paper Feed Pressure Adjustment
Lever to “NORMAL (
)”.
)
p.33
Paper goes over the receiving
tray stopper.
---
Follow the steps to level the receiving tray
as follows:
1)
Fold the Receiving Tray Paper
Guides/Stopper.
2)
Lift up the sides of the receiving tray
with both hands, and move the
receiving tray shaft to the position B.
Position A is recommended in most cases.
A: Ordinary position
B: Move to this position when paper
goes over the tray.
Problem
Possible Cause
Action
A
B
CAN_EN.book Page 240 Friday, September 21, 2007 10:42 AM