Riso 570 User Manual - page 168
Advanced Features
Changing Default Settings [Admin.]
164
[Default]
Jump Wing Control
Change the default positioning of the Paper Jumping
Wing.
Important!:
• This option is available only when the special paper
setting is pre-configured. Contact your dealer (or
authorized service representative) to pre-configure
this setting.
ON,
OFF
Paper Ejection Adj
Change the default settings for “Paper Ejection Adj.”.
)
p.95
Separation Fan: OFF, 1,
2
, 3, 4
Suction Fan: 1, 2,
3
, 4
Default Folder
When the optional Document Storage Card DM-
128CF is attached, change the folder in which to save
the data scanned in the scan mode and the folder to
save the data sent from the computer.
• Scan Data Folder:
1-6 folder (Factory default:
1_folder)
• PC Job Folder:
1-6 folder (Factory default:
1_folder)
[System]
Custom Paper Entry
Specify paper dimensions before using non-standard
sized paper.
)
p.174
Fixed Scan Size
Scan the original at the specified standard size
regardless of the set original size.
For EZ590:
OFF
, Ledger, Legal, Letter,
LetterR, Statement, Statement R
For EZ570:
OFF
, A3, B4, A4, A4R, B5, B5R,
Foolscap
Folder Renaming
When the optional Document Storage Card DM-
128CF is attached, changes the folder name of the
folder used to save data.
1-6 folder
CI Select
Choose between “Internal CI” and “External CI” settings.
Internal CI
, External CI
Base IP Address
Set the IP address for connecting the machine to a network.
IP address settings differ depending on the type of network.
Note:
• To change an input source, touch the applicable
box, or press the
key to rotate options.
• If the message “Starting Up Network Card” is
displayed when touching
[Base IP Address]
, touch
[Cancel]
and wait for the RISO Network Card
(Option) to finish starting up (approx. 1 minute), then
try again.
• When using a DHCP server
[Use DHCP]
• When entering IP address
manually
[Manual Input]
or the Print Quantity
Keys.
Margin-Plus Rate
Specify default size-reduction rate for the “Margin+” setting.
90 to 99 %
(Factory default is 94%)
Display Access
Button
Functions
Description
CAN_EN.book Page 164 Friday, September 21, 2007 10:42 AM