Riso 570 User Manual - page 233
Troubleshooting
When a Message Displays
229
!! No Auto Reproduction
with This Original
and Printing Paper !!
Select Size Manually
(Symptom)
Auto reproduction is not available
because the size of the original could
not be detected.
(Action)
Set the reproduction-size manually.
•
When changing the “Size” setting;
Touch
[Size Setting]
.
•
When stopping the print job;
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
No Master on Print Drum
(Cylinder)
Make a New Master
(Symptom)
You are attempting to print, but there is
no master on the Print Drum (Cylinder).
(Action)
Set the original and create a master.
Touch
[Close]
.
Important!:
• Do not leave the Print Drum (Cylinder)
without a master. This dries out the
drum (cylinder) and causes damage.
You must either create a master or
perform a “Confidential” operation to
wrap a master around the Print Drum
(Cylinder).
Original Size Exceeds
Limitation of Multi-Up
Specify Original Size
(Symptom)
“Multi-Up” is not available for the original
size.
(Action)
Specify the original size.
)
p.65
•
When changing the “Original Size”
setting;
Touch
[Original Size]
.
•
When resuming the print job;
Touch
[Continue]
.
(Alternatively, press the
key to print.)
•
When stopping the print job;
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
Original Undetected
Reset Original
(Symptom)
The machine failed to detect the original
document. The original document may
not be placed.
(Action)
Re-position the original.
Re-position the original to clear the Pop-
Up Message.
•
When resuming the print job;
Touch
[Continue]
.
(Alternatively, press the
key to print.)
•
When stopping the print job;
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Symptom)
The printing paper is smaller than the
Master.
(Action)
Use a correct size printer paper.
•
When printing from the machine;
Touch
[Continue]
.
(You can also print by pressing the
key.)
•
When stopping the print job;
Touch
[Cancel]
.
(You can also stop by pressing the
key or the
key.)
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Continue->PROOF Key)
(Symptom)
The printing paper is smaller than the
Master.
(Action)
Use a correct size printer paper.
•
When printing from the machine;
Press the
key.
•
When stopping the print job;
Touch
[Cancel]
.
(You can also stop by pressing the
key or the
key.)
Message
Symptom/Action
How to Clear a Pop-Up Message
CAN_EN.book Page 229 Friday, September 21, 2007 10:42 AM