Riso 570 User Manual - page 49
Basic Operations
Printing from a Computer Data [Direct Print] [USB Job List]
45
Printing with Semi-Auto (Master)
A master is made after receiving the data. The
machine stops after printing a proof copy.
1)
Check the proof copy and adjust the set-
tings as needed.
2)
Press the
key.
Printing starts.
Printing with Manual
1)
Follow steps 1 to 3 in “Printing with Semi-
Auto (Print)”.
Stop after making a master and printing a
proof copy.
2)
Check the proof copy and adjust the set-
tings as needed.
3)
Press the
key.
Printing starts.
Note:
• If “Management Level” is set to “High/Full Man-
agement” in “User Management”, be sure to
touch the
[Pause]
button and touch the
[Out-
put]
button in the Job List screen after you have
been identified.
• If the data contains multiple pages, repeat the
same steps for each page.
• Entering the number of copies from the Print
Quantity Keys will override the number speci-
fied in the Print dialog box.
• To manually stop a job during master-making or
printing operation, press the
key. In mas-
ter-making process, the machine will stop after
the master is made. In the printing process, the
machine will stop printing.
Press the
key to resume the job.
• You can also adjust Print Position (up and down
only), the density, and the speed while Print
process is in progress.
6
Remove the printed paper.
Open the Receiving Tray Paper Guides and
remove the paper.
Note:
• After printing is completed, the master remains
on the Print Drum (Cylinder). To protect confi-
dential documents from unauthorized duplica-
tion, use the Confidential feature to discard the
master after printing.
)
p.124
Tip:
Job List Screen
Once the data is received, touch
on the
Basic Screen to review current Job List. From the
Job List screen, you can initiate output for jobs
pausing for output, or cancel jobs that are
“Paused/Data-Mapping/Waiting”.
Tip:
ID Print
The data sent from the printer driver as the “ID
Print” is retrieved from the ID Print Job Screen and
printed. For details on how to display the ID Print
Job Screen, see step 5 of
)
p.44
If the Recognition Screen will be displayed, follow
the message on the screen.
The timing of the Recognition Screen differs
depending on the “User Management” setting set
by the administrator.
Note:
• To set the “ID Print” in the printer driver, a user
registration number (ID) is required (one or two
digits).
Contact your administrator for the PIN code or
registered USB Flash Drive, and the user regis-
tration number (ID).
Job List
Close
Clear
Clear
Output
Cps. Page
Owner
Document_1.doc
RISO
100
10
Document_2.doc
RISO
200
1
01
Document_3.doc
RISO
50
2
02
Pause
Waiting Job(s)
ID Print Job
Pause
CAN_EN.book Page 45 Friday, September 21, 2007 10:42 AM