Riso 570 User Manual - Master
Functions for Master-Making
Checking the Print Image Prior to Making Master [Preview]
83
Checking the Print Image Prior to Making
Master
[Preview]
You can check what the actual master will look like by previewing an image of the scanned original or an image of
data sent from a computer. This function is handy for checking the layout or final image of a Multi-Up job.
The operation and display timing differ depending upon the mode.
Note:
• Preview shows an image oriented towards output after printing.
• It shows the scanned original as-is. A margin is required when actually printing. Check to make sure that the mar-
gins are sufficient.
• In “Direct Print” operation,
[Preview]
will be displayed on the Master Making Basic Screen when data is received
from the computer.
)
p.43
Mode name
(original type)
When set
When to display
If “Auto Processing” is ON
Printing from the Original
Document
When setting functions
related to Master Making
(settings from Functions)
After Scanning the
Original
Scans the original, then
temporarily stops to display
preview.
Scan Mode
When setting functions
(master making functions)
related to Scanning (setting
from Functions)
After Scanning the
Original
When in scan mode, an
original is scanned and then
saved, so there is no “Auto
Process” operation.
However, if multiple originals
are placed in an ADF unit
(Option), you can touch
[Close]
after reviewing the
preview to start the scan of
the next original.
Printing Original Data
from a Computer
Stopping the print job prior to
making a master (Semi-
Auto(Print)/Auto Process
OFF), after the machine has
received the original data
Displays when touching
[Preview]
A preview is not shown if
data is sent from the printer
driver with “Full Auto”.
Retrieving Storage Data/
USB Flash Drive data
and printing
When retrieving storage
data/USB Flash Drive data
(set on the Storage Mode
Basic Screen).
Displays when touching
[Preview]
If you touch
[Preview]
, it
displays immediately.
Touch
[Close]
and press the
key to make a master/
print with “Auto Process”.
CAN_EN.book Page 83 Friday, September 21, 2007 10:42 AM