Riso 570 User Manual - page 232
Troubleshooting
When a Message Displays
228
Close Platen Cover
If original moves
you may not get
desired result
(Symptom)
The Platen Cover was opened during
the editing process of the RISO Editor
function.
(Action)
Close the Platen Cover gently.
Touch
[Close]
.
Enter Print Quantity Over [N],
Programed
Minimum Value
(Symptom)
You are trying to print fewer copies than
previously specified on “Minimum Print
Quantity”.
(Action)
Enter a larger number to print, or change
“Minimum Print Q’ty” on the Admin.
screen.
)
p.166
Specify more than the displayed number
of copies and press the
key.
!! Images may not fit
in Frame of Paper with
This Reproduction Size !!
Check Current Selection
(Symptom)
Reproduction size for the detected
original size is larger than paper size.
(Action)
Modify the reproduction size.
)
p.55
•
When resuming the print job;
Touch
[Continue]
.
(Alternatively, press the
key to
print.)
•
When stopping the print job;
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
Invalid Print Drum (Cylinder)
has been Selected
Change Drum (Cylinder), or
Reselect Drum (Cylinder)
Size
(Symptom)
You have selected a different Print Drum
(Cylinder) than the one currently in
place, as confirmed in the Confirm Drum
(Cylinder) Type screen when it was
installed.
(Action)
Select the type of Print Drum (Cylinder)
currently installed.
Alternatively, you can change the Print
Drum (Cylinder).
)
p.209
•
When changing a setting;
In the Confirm Drum (Cylinder) Type
screen, select the type of Print Drum
(Cylinder) currently installed and
touch
[OK]
.
•
When installing a different Print
Drum (Cylinder);
Pull out the Print Drum (Cylinder) and
replace with the correct one.
When the Print Drum (Cylinder) is re-
installed, the Warning Message will
clear.
!! Multi-Up is Not Available
with This Paper Size !!
Replace with Proper Paper
of Standard Size
(Symptom)
Multi-up functions cannot be used when
custom-sized paper is in the Paper Feed
Tray.
(Action)
Load standard-sized paper in the Paper
Feed Tray.
Touch
[Close]
.
(Alternatively, press the
key or the
key to clear.)
!! No Auto Reproduction
Size Selection with This
Combination of Original
and Printing Paper !!
Select Size Manually
(Symptom)
Auto Reproduction Size is less than
50% or more than 200%.
(Action)
Modify the reproduction size.
•
When changing the “Size” setting;
Touch
[Size Setting]
.
•
When stopping the print job;
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
Message
Symptom/Action
How to Clear a Pop-Up Message
CAN_EN.book Page 228 Friday, September 21, 2007 10:42 AM