Riso 570 User Manual - Replacing Consumables
Check for Remaining Amount of Consumables
200
Replacing Consumables
Check for Remaining Amount of Consumables
The machine checks and reports on remaining amount of ink, master, as well as the space left in the disposal box.
Note:
• The report may not be displayed if detection fails.
• The reported amount is for reference only and may not be perfectly accurate.
1
Touch [i Info] on the Basic Screen.
2
Check for remaining amount of con-
sumables.
When running low, be sure to restock supply.
• Master (
)
p.202)
• Ink (
)
p.205)
• Master Disposal (used master) (
)
p.207)
Display Details
About the “My Counter” screen
When the “Management Level” in the User
Management is set to “High/Full Manage-
ment”, touch
[My Counter]
to display “My
Counter” screen.
On the “My Counter” screen, you can confirm
the current user’s Limit C/C, M/C and Present
C/C, M/C. Limit C/C and M/C are set by the
administrator. Consult your administrator for
details.
A4
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Size
Paper
Idle
Info
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
Line
Auto
Consumables Amount
Info
Close
08
15 : 32
10 2007
/
/
Master
Ink
Disposal
A3 Black
Ink Saving
Drum Information
Disposal Box Space
Date and Time
My Counter
Indicator/
Message
Description
The black bar indicates
the remaining amount.
Ex:
approximately 10% left
(Unknown),
---,
no display
Indicates that consumable
data is not available, is not
set, etc.
Close
My Counter
Limit C/C
U-1(G-1)
Present M/C
Limit M/C
Present C/C
CAN_EN.book Page 200 Friday, September 21, 2007 10:42 AM