Riso 570 User Manual - page 77
Functions for Master-Making
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
73
6
Touch the button of the number of
images to use.
To cancel the “Multi-Up Print” settings or return to
the Functions screen, touch
[Cancel]
.
7
Touch [OK].
The following screen appears.
Returns to the Functions screen.
“Multi-Up Print” setting is updated.
8
Make necessary settings.
Make various settings as needed.
9
Press the
key.
Scanning of the original starts.
Important!:
• After displaying the message, “Place Another
Original and Press Start Key
To Cancel, Press Stop Key” the machine waits for
the next original to be loaded. Set the next original
and press the
key while waiting (interval)
time. Press the
key to cancel the “Multi-Up
Print” mode.
• The Glass Platen and the ADF unit (Option)
cannot be used at the same time. If using the
Glass Platen to scan the first sheet of the origi-
nal, you must continue to use the Glass Platen
to scan the rest of the original.
Note:
• When “Multiple-Original” is used in Multi-Up
Print, the actual number of pages to be scanned
is specified. In the case that the actual number of
pages in the document is less than the number of
pages specified in the mode settings, set an
equivalent number of blank pages in the machine
to make up for the specified number. (For exam-
ple, if you want to make eight pages and there
are only three originals, add a blank page to the
originals and set the four sheets for scanning.)
)
p.66 “Original Orientation and Print Results”
• When using the “Auto Process” setting, printing
will continue automatically when originals are
set in the ADF unit (Option).
• When "Ink Saving" is turned ON, the Image
Processing Mode cannot be changed between
individual originals.
• To cancel a “Multi-Up Print” setting once it has
been confirmed, follow steps 2 and 3, touch
[OFF]
and then
[OK]
on the screen.
Cancel
OK
Single-Original
Set the original
in direction shown
in the right figure
2UP
4UP
8UP
16UP
Cancel
OK
Single-Original
Set the original
in direction shown
in the right figure
2UP
4UP
8UP
16UP
Basic
Selections
Functions
Admin.
P.
Program
Meter Display
1/4
Job Memory
Job Memory
Dot Process
Book Shadow
Top Margin
Ready to Make Master Multi-Up
Multi-Up Print
2 Up
Cancel
OK
Single-Original
Set the original
in direction shown
in the right figure
2UP
4UP
8UP
16UP
OFF
CAN_EN.book Page 73 Friday, September 21, 2007 10:42 AM