Riso 570 User Manual - page 211
Replacing Consumables
Emptying the Master Disposal Box
207
Emptying the Master Disposal Box
Used masters are held in the Master Disposal Box. When the Master Disposal Box becomes full, a message displays
and the machine stops. Discard the used masters.
B
Caution:
• Wash immediately with soap if you should get ink on your hands, etc.
Important!:
• The Master Disposal Box can be padlocked to prevent the information contained in the discarded master from
being leaked. If the Master Disposal Box is safely protected by the padlock, be sure to contact the administrator
before discarding the master.
• When “Protect” is ON, you can remove the Master Disposal Box only when the messages such as “Master Dis-
posal Box is Full” or “Master Jammed in Disposal Unit” are displayed.
)
p.178
1
Remove the Master Disposal Box.
If the Master Disposal Box lever is locked, slide
the lever to the right to unlock.
Grasp the Master Disposal Box handle and pull
the box forward.
Important!:
• If the Master Disposal Box is padlocked, con-
tact the administrator to undo the padlock.
2
Discard the ejected masters.
Tilt the Master Disposal Box forward and directly
discard the used master into the garbage box (or
bag) by grasping the Push Out Lever.
3
Place the Master Disposal Box into
position.
Insert the Master Disposal Box until it stops.
Unlock
Master Disposal Box handle
Push Out Lever
chapter8.fm Page 207 Wednesday, September 26, 2007 2:00 PM