Riso 570 User Manual - page 238
Troubleshooting
When a Message Displays
234
A confirmation screen displays when done.
Press the
key to approve selection.
Returns to the Basic Screen.
Screen Display
Description
Values
[H4] Master Density
Select the standard density to be applied
during creation of the master.
1 (Light) - 10 (Dark)
[H5] Print Density Fine Adjustment
Select a Print Density level to match the
master to fine-tune print result.
1 (Light) - 5 (Dark)
[H6] First Print Density Adjustment
Select a Print Density level of the first print to
match the master.
This can be selected independent of [H5] Print
Density Fine Adjustment.
1 (Light) - 5 (Dark)
2
3
4
5
1
7
8
9
10
6
Consumables Information Input Wizard
Master Information Input
Next>
H4 Master Density
2
3
4
5
1
Consumables Information Input Wizard
Master Information Input Next> H5 Print Density Fine Adjustment 2 3 4 5 1 Consumables Information Input Wizard Master Information Input Next> H6 First Print Density Adjustment Confirm the input data shown below. Press the START key if those set values are OK. 1 1 1 Item Value Consumables Information Input Wizard Master Information Input H4 Master Density H5 Print Density Fine Adjustment H6 First Print Density Adjustment CAN_EN.book Page 234 Friday, September 21, 2007 10:42 AM