Riso 570 User Manual - page 43
Basic Operations
Printing from a Paper Document or Book
39
• Once the originals are placed into the ADF unit,
“Auto Process” setting is turned ON. Press the
key to turn it OFF.
Default “Auto Process” setting for the ADF unit
can be changed on the Admin. screen.
)
p.61
)
p.163
Note:
• Up to 50 sheets of 80 g/m
2
(21-lb bond) paper
can be placed in the ADF unit.
• To print a proof copy after each master-making
process, select
[ADF Semi-Auto]
.
)
p.150
5
Configure print functions.
Make sure the Master Making Basic Screen is dis-
played and make various settings if needed.
If the Master Making Basic Screen is not dis-
played, press the
key.
In the Master Making Basic Screen, select func-
tions as needed.
Note:
The following selections are available:
• Image Processing mode (
)
p.52)
• Scanning Contrast (
)
p.54)
• Size (
)
p.55)
• Paper (
)
p.60)
• Auto Process (
)
p.61)
• Dot Process (
)
p.62)
• Ink Saving (
)
p.64)
• 2 Up/Multi-Up Print (
)
p.65)
• Book Shadow (
)
p.77)
• Top Margin (
)
p.79)
• Side Margin (
)
p.81)
• Preview (
)
p.83)
• Max. Scan (
)
p.86)
• Program (
)
p.125)
• Job Memory (
)
p.136)
• Idling Action (
)
p.146)
• Renew Page (
)
p.147)
• ADF Semi-Auto (
)
p.150)
This setting is available when the ADF unit
(Option) is installed.
• Job Separation
This setting is available when the Job Separator
(option) is installed.
• Sorter
This setting is available when the Sorter
TM2500 (option) is installed.
6
Check the Paper Receiving Tray.
Adjust the position of the Receiving Tray Paper
Guides and Paper Stopper to match the paper
size used.
)
p.35
A4
Line
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
Info
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
CAN_EN.book Page 39 Friday, September 21, 2007 10:42 AM