Riso 570 User Manual - Adjusting The Print Position
Functions for Printing
Adjusting the Print Position [Print Position Adjustment]
90
Adjusting the Print Position
[Print Position Adjustment]
Use the Vertical Print Position Adjustment keys to adjust the print position in the vertical direction; and use the Hor-
izontal Print Position Adjustment Dial (located on Paper Feed Tray) to adjust it in the horizontal direction.
Adjustment range Vertical direction: ±15 mm (±
19
/
32
") Horizontal direction: ±10 mm (±
3
/
8
") *
The vertical positioning may be adjusted while Printing is in progress.
*For paper of widths over 297 mm (±11
11
/
16
"), the adjustment range in the horizontal direction becomes smaller than
±10 mm (±
3
/
8
").
Important!:
• After adjusting the print position, print a proof copy to check the result.
)
p.92
Vertical (Up/Down) Adjustment
Press the
or
key to move up or down.
1)
Center Position Indicator
Indicates when vertical positioning has not changed.
2)
Key
Each press shifts the print position upward in steps of
about 0.5 mm (
1
/
64
")
.
3)
Key
Press to return to original position.
4)
Key
Each press shifts the print position downward in steps of
about 0.5 mm
(
1
/
64
"
).
The Print Basic Screen shows current vertical adjust-
ment.
Paper output direction
Paper output direction
Black
Basic
Selections
Functions
Admin.
Print Position
Paper
Idle
Info
Select Print Quantity
A4
15.0mm.
Reserva-
tion
Interval
Renew Page
CAN_EN.book Page 90 Friday, September 21, 2007 10:42 AM