Riso 570 User Manual - page 38

Basic Operations

Preparing to Print

34

Adding or Replacing Paper

When you add paper or replace with paper of a different size at the time of printing, press the Feed Tray Ascent/

Descent Button to lower the Paper Feed Tray.

• The Paper Feed Tray is lowered while you press and hold the button, and 

when you release the button, the tray stops at that position.

• When the tray runs out of paper or you remove all paper, the tray is automat-

ically lowered to the bottom.

Important!:

• When changing to a different paper size, remember to readjust the Receiving 

Tray Paper Guides and Paper Stopper. (

)

p.35)

• When changing to a different quality paper, remember to adjust the Paper Feed Pressure Adjustment Lever.

Closing the Paper Feed Tray

Before closing the Paper Feed Tray, remove the paper and widen the Feed Tray Paper Guides to the limits. Then 

close the Paper Feed Tray.

Feed Tray Ascent/Descent

Button

CAN_EN.book  Page 34  Friday, September 21, 2007  10:42 AM