Objet Objet30 User Manual - page 10
About This Guide
1–2
DOC-24000 Rev. C
Using This Guide
This user guide provides instructions for installing, operating and
maintaining Objet30 3‐D printing systems. It explains how to use features,
and provides practical examples to guide you as you use the system.
This document is meant to be used with the Objet30 3‐D printer, running
software version 30.2.1.5896, and with Objet Studio software version 8.5.9.
This guide assumes that:
•
all the hardware, software, and network components of your Objet30
system are installed, configured, and operating correctly.
•
the operator has a working knowledge of the Windows
®
PC platform.
For More Information
Visit http://www.objet.com/ for more details about Objet’s technology,
products and consumables, and for service and support contacts.
For other documents that relate to Objet30 3‐D printing systems, and for
this document in other languages, contact your regional Objet Customer
Support office.
If you have any questions about the information presented in this
document, or if you have any comments or suggestions for future editions,
please send a message to support@objet.com.