Objet Objet30 User Manual - page 125
Manual is about: 3-D Printer System
of
142
DOC-24000 Rev. C
7–45
Objet30 User Guide
After the Objet30 printer calibrates itself, the last wizard screen
appears.
Figure 7-63: Final Head Replacement screen
17. After replacing print heads, you should check the head alignment
before using the Objet30 printer to produce models.
•
Select
Yes
and click
Done
to open the Head Alignment wizard (see
“Aligning the Print Heads” on page 31).
•
Select
No
and click
Done
to align the heads at another time.
18. In the final wizard screen, click
Done
.