Objet Objet30 User Manual - page 72
Using Job Manager
6–4
DOC-24000 Rev. C
Job Manager
Operations
Even after sending a build tray to the 3‐D printer, you can inspect the tray—
and make changes to it, if necessary—as long as it is still in the print queue.
To inspect the build tray:
1. Select the job.
2. Click the Edit Job icon
or open the Job menu and select
Edit
.
Objet Studio opens, displaying the build tray. To make changes to it, see
“Making changes to a Job” on page 6‐10.
The following operations are available from the client Job Manager
interface:
The 3‐D printer Status screen enables clients to monitor the progress of
printing jobs. To display the screen, click the Machine Status icon
.
Icon
Menu Option
Purpose
3‐D Printer >
New Job
Launches Objet Studio; to prepare new trays.
3‐D Printer >
Set Printer
Displays a network‐browsing dialog box, to
connect to an Objet server computer. To specify
a computer, it must be operating and
connected to the local network.
——
Displays the status of the 3‐D printer (see
3‐D Printer > Report Displays options for user messages and alerts
(paper printer, e‐mail, SMS—see “Configuring
Job > Delete...
Removes the selected job from the queue.
Job > View…
Opens a window displaying the selected tray.
In this window, you can view the tray from
different angles.
Job > Properties
Opens a window displaying the properties of
the selected model.
Job > Edit
Launches Objet Studio and loads the current
tray, to enable making changes to the tray after
it is sent to the server but before it is printed.
Help > About...
Displays the Job Manager version.