Objet Objet30 User Manual - page 46
Using Objet Studio
5–12
DOC-24000 Rev. C
Repositioning
Objects
You can select and manipulate objects on the build tray after selecting the
following icons or menu options.
After using these repositioning icons once, they are disabled, unless you
first click the Sticky Mode icon
. After clicking this icon, the repositioning
icon used remains active until you click the Sticky Mode icon again to
release it.
Another way of repositioning objects on the build tray is by using the icons
on the Transform toolbar that nudge the selected object in different ways.
Viewing Object Properties
After you manually manipulate an object with the mouse, its new
properties are displayed in the Transform tab of the object properties dialog
box.
Icon Menu
Option
Purpose
What to do
(none)
For selecting an object.
Click the object on the build tray.
Object >
Translate
For selecting and moving
an object with the mouse.
Click the object to select it.
Drag the object to a new location
while holding down the mouse
button.
Object >
Rotate
For selecting and rotating
an object on the Z‐axis.
Click the object to select it.
Hold down the left mouse button
and move the mouse left/right.
Object >
Scale
For selecting and
changing the size an
object.
Click the object to select it.
Hold down the left mouse button
and move the mouse left/right.
Click to move the object 20 mm along the X‐axis.
Click to move the object 20 mm along the Y‐axis.
Click to move the object 30 degrees on the Z‐axis.
Click to rotate the object 30 degrees on the X‐axis.
Click to rotate the object 30 degrees on the Y‐axis.
Click to rotate the object 30 degrees on the Z‐axis.
The object-properties dialog box is displayed by default (see figure 5-5 on
page 4) and whenever the screen layout is changed or refreshed (see