Objet Objet30 User Manual - page 59
Manual is about: 3-D Printer System
of
142
DOC-24000 Rev. C
5–25
Objet30 User Guide
Figure 5-32: Tray validation warning
To cancel the Build command so you can correct the problem, click
No
.
To print the models as they are positioned on the tray, click
Yes
.
Figure 5-33: Constraints Settings dialog box, with color codes for problematic
model positioning
The tray file is sent to Job Manager. Objet Studio closes and Job Manager
opens, so you can monitor the progress of your trays—before, during, and
after printing.
To return to Objet Studio from Job Manager, click New Job
.