Objet Objet30 User Manual - page 43
Manual is about: 3-D Printer System
of
142
DOC-24000 Rev. C
5–9
Objet30 User Guide
Figure 5-13: Tray before objects are properly arranged
Figure 5-14: Tray after objects have been automatically arranged
Manual
Positioning
You can manually position objects on the build tray—even if they were
inserted using automatic placement (with the Arrange models option
selected in the Insert dialog box). Considerations for positioning objects are
reviewed in “Model Orientation” on page 5‐10. Tools for changing the
position of objects are described in “Repositioning Objects” on page 5‐12.
Because of the unique characteristics of each type of modeling material, it
is recommended that you select the material before inserting objects on the
tray with automatic positioning or running Automatic Placement.