Objet Objet30 User Manual - page 122
Operating & Maintaining the Objet30 3-D Printer
7–42
DOC-24000 Rev. C
Installation
Problems
If the printer detects that there is a problem after you install print heads,
relevant warning screens appear.
•
If the print head you installed is not new—that is, it was previously
removed from a printer—a message appears.
Figure 7-56: Used print head message
To continue with the installation of this print head, click
Yes
.
To remove this print head and install a new one, click
No
.
•
If the printer software does not sense the replaced head, the following
warning screen appears.
Figure 7-57: Incorrect-installation screen, showing which head(s) to re-insert
If this happens:
a. Re‐insert the print‐head driver card into its socket.
b. In the wizard screen, select the check box to confirm that you have
re‐inserted the card, and click
Next
.