Objet Objet30 User Manual - page 83
DOC-24000 Rev. C
7–3
Objet30 User Guide
2. After the computer boots, log in to Windows and launch the Objet30
control application:
•
On the computer desktop, double‐click the Objet30 printer icon.
or—
•
From the Start menu, select
Objet >
Objet30.
The Objet30 printer interface screen opens (see figure 7‐3). All monitoring
and controlling of the Objet30 printer is done from this interface.
Figure 7-3: Objet30 interface
A valid HASP key is required on the printer computer for the application to
open. This key should be installed during printer installation. If the
application does not open and a HASP message appears, contact your
dealer or Objet Customer Support.
Printer mode
Support material
cartridges
Display
toggle button
Pause button
Stop button
Model material
cartridges
Current activity
Online/offline button
Objet30 installations utilize one monitor for displaying both the computer
running Objet Studio / Job Manager and the computer installed inside the
printer. Make sure that the KVM (keyboard-video-mouse) switch is in the
correct position so that the Objet30 printer interface is displayed.