Objet Objet30 User Manual - page 113
DOC-24000 Rev. C
7–33
Objet30 User Guide
The first in a series of alignment screens appears.
Figure 7-47: Head alignment screen
11. In the head‐alignment screen, select the number that indicates which
lines align in the upper and lower rows.
Note: Because the alignment of the middle lines is optimum, the number
“8” is selected, by default, in the wizard screen. This does not change the
head alignment. If you select other numbers, the wizard adjusts the head
alignment, accordingly.
12. Click
Next
.
The following screen is displayed.
Figure 7-48: Updating System Parameters confirmation screen
13. Continue as follows:
•
To make the alignment changes in the printer, make sure that Yes is
selected, and click
Next
.
•
To recheck the alignment test results before making the alignment
changes in the printer, click
Previous
.
•
If you do not want to make alignment changes in the printer at this
time, select No and click
Next
.