Objet Objet30 User Manual - page 65
DOC-24000 Rev. C
5–31
Objet30 User Guide
Save Tray As…
In addition to saving the tray as an objtf file, for producing it with an
Objet30 3‐D printer, you can save a group of objects positioned on the tray
as an stl file. You can then use this file as any other stl file, both in Objet
Studio and in other applications. You can also display this and other stl files
as “floating” objects, without the build tray. This is useful for inspecting
objects from every angle.
To save the build tray as an stl object:
1. From the File menu, select
Save Tray As…
Figure 5-42: Save As dialog box
2. At the top of the dialog box, select the appropriate folder.
3. At the bottom of the dialog box, enter a file name.
4. Open the Save as type pull‐down menu, and select
STL Files (*.stl)
.
5. Click
Save
.
To display stl files without the build tray:
1. From the File menu, select
Open Tray
.
2. In the Open dialog box, open the Files of type pull‐down menu, and
select
STL Files (*.stl)
.
3. Click
Open
.
A three‐dimensional image of the file is displayed. You can use many of
the Objet Studio tools to manipulate the image on the screen.