Objet Objet30 User Manual - page 49
DOC-24000 Rev. C
5–15
Objet30 User Guide
The dialog box displays the current grid settings.
2. As required, make changes to the settings, and select or clear the check
boxes.
3. Click
Apply
or
OK
.
Changing an
Object’s
Orientation
There are several methods for changing the orientation of objects on the
build tray.
To rotate an object:
¾
Select the object and use the Rotate icon or Object menu options (see
“Repositioning Objects” on page 5‐12).
To select an object’s plane and re-align it with one of six basic directions:
•
From the Plane Alignment toolbar:
1. Click the Select Plane icon
.
2. Click a plane on an object displayed on the build tray.
3. Click the appropriate align icon—
•
From the Tools menu:
1. Select
Plane Alignment > Select Plane
.
2. Click a plane on an object displayed on the build tray.
3. Select
Plane Alignment > Align Bottom/Top/Front/Back/Left/Right
(as
appropriate).
Note: When you are finished re-aligning the plane of objects on the build
tray, release the Select Plane icon or clear “Select Plane” from the
Tools > Plane Alignment menu.
To flip an object 180 degrees on any axis:
1. Select the object.
2. From the Object menu, select
Flip > Flip X / Flip Y / Flip Z
.
To make precise changes to the object’s orientation on any axis:
1. Select the object.
2. Display the Transform tab or the R. Trans. tab of the object properties
dialog box (see figure 5‐16 on page 13 and figure 5‐17 on page 13).
or—
From the Object menu, select
Relative Transform
(see figure 5‐18 on
3. Change the Rotate values for the desired axis.
Align Bottom
Align Top
Align Front
Align Back
Align Left
Align Right