Objet Objet30 User Manual - page 101
DOC-24000 Rev. C
7–21
Objet30 User Guide
Maintaining the Printer
The performance of routine maintenance tasks is essential for getting
satisfactory results from Objet 3‐D printers. Perform the tasks at specified
intervals for optimum performance.
Routine
Maintenance
Schedule
Frequency
Task
For More Information
After every print job
Clean the print heads.
Clean the build tray and
the surrounding area.
See “Cleaning the Print
Heads” on page 7‐22.
Weekly
Perform the Pattern test.
See “Pattern Test” on
page 7‐24.
Weekly
Clean and inspect the
wiper.
Replacing the Wiper”
Weekly
Restart the printer
computer and the
server computer.
Monthly, and after
replacing print heads
Check the alignment of
the print heads.
See “Aligning the Print
Heads” on page 7‐31.
Every 500 hours of
printing, or once every
six months
Calibrate the load cells.
page 7‐45.
Every
1000 hours of
printing, or once a year
Preventive maintenance
visit by authorized
service engineer.
Once a year
Inspect the activated‐
carbon odor filter, and
replace if necessary.
page 7‐47.