Objet Objet30 User Manual - page 51
Manual is about: 3-D Printer System
of
142
DOC-24000 Rev. C
5–17
Objet30 User Guide
Default Object
Properties
You can set several default properties for objects placed on the build tray:
•
locking of object orientation on the tray
For an explanation of this feature, see Freezing an Object’s Orientation
on page 5‐16.
•
surface finish for printed models
For an explanation of this feature, see Surface Finish on page 5‐16.
•
support strength used during printing
For an explanation of this feature, see Choosing the Support Strength on
•
“smartcast” printing
For an explanation of this feature, see “Smartcast”—Filling Models with
Support Material on page 5‐27.
To set any of these default properties:
¾
From the File menu, select
Default Properties
.
Figure 5-21: Setting default properties for objects