Objet Objet30 User Manual - page 26
Introducing the Objet30 3-D Printing System
3–6
DOC-24000 Rev. C
Work Environment
Extreme heat and humidity conditions can adversely affect the operation of
the Objet30 3‐D printer. Therefore, it is recommended that you use
ventilation or air‐conditioning systems, if necessary, to keep the work area
within the following ranges:
•
18°–25° C (64°–77° F)
•
30%–70% relative humidity
Workstation Requirements
The minimum requirements for computer components used with Objet 3‐D
printer software are listed in the following table.
* Also supported:
Windows 7 (32‐bit)
Professional, Ultimate, Enterprise editions
Windows Vista (32‐bit)
Ultimate, Business, Enterprise editions
Recommendations:
•
Monitor resolution: 1280 x 1024 pixels
•
Color quality: 32 bit
•
Two Ethernet ports
Server/
Stand-alone Station
Client Workstation
Processor
Pentium 4, 3.0 GHz,
512 KB cache memory (min.)
Pentium 4, 3.0 GHz (min.)
Operating System*
Windows XP
Professional
Windows XP
Professional
Graphics Card
Supporting open GL,
with 512 MB of memory
Supporting open GL,
with 512 MB of memory
RAM
4 GB (min.)
2 GB (min.)
CD Drive
IDE CD ROM
IDE CD ROM
Hard-Disk Drive
40 GB (min.)
40 GB (min.)
Network Adaptor
Cards
LAN TCP/IP (2)
LAN TCP/IP (1)
Ethernet Cables
•Straight‐through cable (1)
•Crossover cable (1, supplied)
Straight‐through cable (1)