Objet Objet30 User Manual - page 78
Using Job Manager
6–10
DOC-24000 Rev. C
Making
changes to a
Job
From the job (“print”) queue of Job Manager, you can open jobs to make
changes to them before printing.
To make changes to a job:
1. Select the job in the print queue.
2. Click the Edit Job icon
or open the Job menu and select
Edit
.
Objet Studio opens, displaying the build tray. (The status of the job in
Job Manager changes from “Waiting” to “Editing.”)
3. Make changes to the build tray in Objet Studio (see chapter 5, “Using
4. In Objet Studio, save the changes by selecting
File > Save Tray
(or by
pressing
Ctrl+S
).
5. Close Objet Studio.
The status of the job in Job Manager changes back to “Waiting.”
Job > Restart Job
For a stopped job in the print queue: Starts
printing the selected job from the beginning.
For a selected job in the History section: Moves
the job to the print queue and changes its status
to Waiting.
Job > Stop...
Instructs the 3‐D printer to stop printing after
curing the currently printed slice. (You can
continue printing with the Resume icon or
menu option, but for short interruptions, use
the Pause icon or menu option.)
Job > Pause...
Instructs the 3‐D printer to stop printing after
curing the currently printed slice. (This
command does not flush the printing buffer.
Therefore, use it instead of Stop when you
intend to continue printing the job shortly.)
Job > Resume
Continues printing the current job after
printing was stopped with the Stop or Pause
icon or menu option.
Job > Delete Job...
Removes the selected job from the queue.
Job > Review Job…
Opens a window displaying the selected tray.
In this window, you can view the tray from
different angles.
Job > Job Info…
Opens a window displaying the properties of
the selected model.
Job > Edit Job…
Launches Objet Studio and loads the selected
tray, to enable making changes to it before
being printed. (See “Making changes to a Job,”
below.)
Help > About...
Displays the Job Manager version.
Icon
Menu Option
Purpose