Objet Objet30 User Manual - page 73
DOC-24000 Rev. C
6–5
Objet30 User Guide
Figure 6-3: Printer status screen
Configuring
User Alerts
Job Manager can alert you and others to the status of the jobs sent to the
server for printing. The following events can be reported:
•
The level of model or support material is low.
•
The job was interrupted.
•
The job was completed successfully.
To send e‐mail and SMS messages, make sure that e‐mail software
supporting MAPI is installed on the printer’s server computer. To send SMS
messages, the cellular phone service must support the transmission of e‐
mail messages by SMS. With SMS alerts, only the subject line of the e‐mail
message is transmitted.
Note: In the e-mail program, make sure the security settings are set to
“low” and add the server Job Manager to the “trusted” list (select
Tools > Options, Security tab).
To configure Job Manager to send notifications and alerts for your jobs:
1. Click
or select
Notifications
from the 3‐D Printer menu.
The Notifications dialog box opens.
Figure 6-4: User alerts settings