Objet Objet30 User Manual - page 70
Using Job Manager
6–2
DOC-24000 Rev. C
The Job Manager application is different for client workstations and for the
computer connected directly to the 3‐D printer.
•
Job Manager installed on client computers displays the queue and
status only for jobs sent to the 3‐D printer server from that computer,
and allows the user to edit only these jobs.
•
Job Manager installed on the computer directly connected to a specific
3‐D printer displays the queue and status for all jobs sent to that 3‐D
printer by client computers on the network. It also allows editing and
manipulation of all jobs, and enables re‐sending previously‐printed
jobs to the printer.
Client Job Manager
When you open the client Objet Studio / Job Manager software for the first
time, a dialog box opens prompting you to connect to an Objet server
computer. To do this, the server computer must be operating and connected
to the local network.
¾
Click
Browse
to find and select the name of the required server
computer and then click
OK
to close the dialog box.
Figure 6-1: Server connection dialog box
To change the server-computer connection (to connect to another
printer):
¾
From the Job Manager screen, click the Connect icon
on the toolbar,
or open the 3‐D Printer menu and select
Set Printer
.
If there are several Objet30 printers on the local network, client computers
can connect to any of them, but only one at a time.