Objet Objet30 User Manual - page 97
Manual is about: 3-D Printer System
of
142
DOC-24000 Rev. C
7–17
Objet30 User Guide
3. In the next screen, indicate whether or not the tray is empty and click
Next
.
Figure 7-18: Tray status screen
The shutdown procedure begins.
Figure 7-19: Shutdown progress screen
The shutdown procedure may take up to 10 minutes while the
following tasks are performed:
a. The print block returns to its starting point on all axes.
b. The print heads are heated.
c. The print heads are cleared of any remaining material.
After these tasks are completed, the final wizard dialog box appears, in
which you choose whether or not to shut down the computer in the
Objet30 printer at this time.
Figure 7-20: Computer Shutdown confirmation dialog box