Objet Objet30 User Manual - page 54
Using Objet Studio
5–20
DOC-24000 Rev. C
To set the color indication of objects displayed on the build tray:
1. In the Define Colors dialog box, select one of the options.
•
Show color according to material.
•
Show color according to building style.
2. Click
OK
.
Note: This selection has the same effect as toggling the object-color-
display switch.
Figure 5-27: Object-color-display switch
Displaying
Large Files
Very large stl files can be slow to display and may be difficult to manipulate
easily on the build tray. If this is the case, you can display just an image of
the object on the build tray without loading the entire file. The stl file itself
is not changed, and the complete file is sent to the printer.
To display an image of stl files when you place objects on the build tray:
1. From the Tools menu, select
Options
, and display the Settings tab.
Figure 5-28: Options dialog box, Settings tab
2. In the Large Files section, select
Load Partial
. (
Load Full
is the default
setting.)
Before sending a build tray to the printer, or when you perform tray
validation, Objet Studio checks if there is a problem with the stl files or the
positioning of objects on the tray. If so, the affected objects are displayed
with special colors (see “Tray Validation” on page 5-23).