Quickie Q2 Lite Construction Manual - page 114
joggles. Layup 2 UNI at 45 deg. to the trailing edge. At the leading edge,
overlap a minimum of 0.5" onto the previous bottom layup. At the trailing
edge, layup glass to glass. Leave the aileron alone until it has cured to
avoid changing the alignment, and then feather the top surface UNI plies
to remove the leading edge (L.E.) joggle. .
.....
Leave the trailing edge untrimmed until after the aileron is mounted
on the main wing, so that it can be made to match the trailing edge of the
wing. The joggle on the bottom of the ailerons (as well as the joggles on
the bottom of the rudder and elevators) is filled with dry micro after
installation of the aileron on the wing or during the finishing phase.
SEE NEXT PAGE FOR DETAILS OF CUTTING AND LAMINATING CLOTH ON AILERONS
CONTINUED ON NEXT PAGE
PAGE 6-1