Quickie Q2 Lite Construction Manual - page 157
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
1". When cured, laminate 2 BID on the top surfaces, using a glass-to-
glass trailing edge treatment exactly like you did on the aileron. If
you are careful, you may be able to accomplish the laminations with the
wing jigged vertically, to save time; however, beware of epoxy runoff
yielding dry lamination. An alternative method would be to do each
surface on the flat, instead.
END OF CHAPTER
PAGE 9-9
Q2 Plans - Chapter 10 - Page 10-01