Quickie Q2 Lite Construction Manual - page 287
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
MAIN WING TIPS
.....
Now would also be a good time to carve wing tips on the main wing.
If you wish, you may add up to 3 inches of foam to the wing span to
facilitate a smooth looking wingtip. Keep it simple, however.
VERTICAL FIN TIP
.....
Ditto for the tip of the vertical fin.
VERTICAL FIN ATTACHMENT
.....
Previously, you mounted the vertical fin to the bottom of the
fuselage. Now is the time to permanently attach it to the fuselage and
create a pleasing fillet shape at the same time. Using pieces of foam,
fill the gap between the vertical fin and the aft fuselage. Carve the
foam down to a pleasing shape, as shown, and laminate 2 BID overlapping
onto the aft fuselage skin a minimum of 2 inches.