Quickie Q2 Lite Construction Manual - page 248
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
RUDDER CABLE DISCONNECTS
.....
In order to complete making your Q2 trailerable, it is necessary
to make quick disconnects for the two rudder cables running aft from the
rudder pedals to the tailwheel. A simple method is shown here. To
disconnect the cables, remove one of the AN3-5A bolts from each side.
.....
In practice, to remove the rear fuselage, remove the 10 screws in
the aft fuselage shell. Next, pull the forward and aft fuselage shells
apart using the slack due to the rudder pedals so that you can remove
the AN3-5A bolts indicated above.
.....
As a final note, if your Q2 has any antennas located in the aft
fuselage, they too will need to have quick disconnect fittings.