Quickie Q2 Lite Construction Manual - page 24
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
Pivots - metal tube bushings in wood. Loose fit on
nails. The 1/8" dia. brass tube available at hobby
shops is excellent for the bushings. MUST BE
FRICTION FREE.
These ratios result in a 43-part hardener to
100-part resin mix.
RATIO BALANCE FOR RESIN/HARDENER
1.
Place both empty cups as shown (wet
the hardener cup).
2.
Adjust ballast weight to level mark.
3.
Fill resin cup with desired amount of
resin 1 to 6 oz.
4.
Add hardener to hardener cup to
balance scale on level mark.
5.
Pour the hardener into the resin cup
and mix.
Hot Wire Cutter
.....
You will need a hot wire cutter to carve all the foam cores for
the canard, vertical fin, and wing. Refer to sketch.