Quickie Q2 Lite Construction Manual - page 62
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
Q2 Plans - Chapter 3 - Page 3-13
.....
In some areas a sharp corner is desirable and maximum strength
isn't required. In these areas a flox corner is used. A simple
unsupported glass corner has very poor strength. To strengthen this
corner, a triangle of flox is used to bond the glass plies together.
The flox corner is done just before one glass surface is applied for
a wet bond to one surface. The other glass surface has to be sanded
dull in preparation as shown.
HEALTH PRECAUTIONS