Quickie Q2 Lite Construction Manual - page 247
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
FASTENER INSTALLATION
.....
Make 10 of FC1 and 2 of FC2 using the full size patterns provided.
Attach the 10 FC11s to the forward fuselage at the 10 locations using
AN525-10R10 screws. (2 per fastener).
.....
Jig the rear fuselage shell into position flush against the forward
fuselage shell using a few dabs of Bondo. By shining a light inside the
fuselage at each fastener location in order to see each FC1, drill in
the #12 holes (10 locations) for the K1000-3 nutplates. Mount the
nutplates to the FC1 fasteners with AN426AD-3-5 rivets, countersinking
them flush from the side of FC1 next to the pads.
.....
Install the AN525-10R10 screws (10 locations) to complete the
assembly. That is all there is to it.