Quickie Q2 Lite Construction Manual - page 89
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
.....
Put a generous radius on the foam edges and sand the wide glass
edges dull for glass to glass bond. Use your wire brush to rough out a
depression in the middle of the block. Finish smoothing the depression
by rubbing it with a scrap of green foam. Radius the corners of the
depression. Blow or brush all of the foam dust off the surfaces.
.....
Cut three plies of BID as shown.
CONTINUED ON NEXT PAGE
PAGE 3-21
Q2 Plans - Chapter 3 - Page 3-22