Quickie Q2 Lite Construction Manual - page 88
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
.....
Mix 4 oz. of Safe-T-Pox epoxy; using about 1 oz, make a small
batch of micro slurry and coat the foam as shown. Make dry micro from
the leftover slurry and a small radius with it as shown.
.....
Lay up the first ply of BID as shown.
.....
Using plain epoxy (no micro), lay up the other two plies and
allow to cure. Note how the 45° fiber orientation allows the glass to
lay down completely into the small radius.
.....
Knife trim along the foam edges. After the first layup has cured
and the edges have been trimmed, the thicker foam block is carved and
contoured as shown.